Zero Paints : Etch Primer for Metal/Resin (2 x 60ml)

Etch Primer for Metal/Resin (120ml)

Two pack anti-corrosive Grey Etching Primer for Metal and Resin (Suitable for White Metal, Resin and Photoetched Parts)

Contents:-

• 1 x 60ml Etch Primer and
• 1 x 60ml Hardener

Spray Application.
Mixing ratio by volume
Primer (Grey Liquid) 60 ml to Hardener 60 ml (ONLY MIX WHAT YOU REQUIRE EACH TIME)
Prepare the mixture in a plastic beaker DO NOT USE metallic containers.
Once mixed Pot-life is 24 hours @ 20° C

Drying Time
Air drying at 20 °C: - Dust free: 8 – 10 min. - Handling: 20 min. - Through drying: 60 min.
If required sand using 3600 grade or higher Micromesh or Ultra Fine Scotch Brite Pads
Once applied thoroughly clean your Airbrush A.S.A.P. as the Primer will damage your Airbrush if left.

Characteristics
Excellent adhesion on Iron, Steel, Aluminium and White Metal, Light Alloys, Zinc-coated Metal and Stainless Steel, Good covering power, Fast drying, Chromate-free and lead-free

Health and Safety Notes :
Highly flammable. Irritating to eyes and skin. May cause sensitization by skin contact.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Vapours may cause drowsiness and dizziness. Keep container in a well-ventilated place.
Avoid contact with skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Wear suitable gloves. If accidentally swallowed obtain immediate medical attention. DO NOT induce vomiting.

Basic Zero Paints F.A.Q. All Zero Paints dry matt and requires clear coating unless otherwise specified Application Notes : Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi, 3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.   For additional thinning use Basecoat Thinners. Which Airbrush Cleaner should I use? You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirit or Acrylic Thinners, they are not suitable.

Health and Safety Notes : Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well-ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here ->