Size : 610mm x 370mm
Use before painting clear coats or lacquering.
One light wipe with a tack rag removes all particles of dust and fluff and leaves you with a clean surface ready for coating.
Can be used over and over again.
Many other uses: Try wiping down the airbrush/compressor hose with the tack cloth, this will reduce the static, therefore, less dust on the model.
Packaging may vary from that shown.
Basic Zero Paints F.A.Q.
All Zero Paints dry matt and requires clear coating unless otherwise specified
Application Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.
For additional thinning use Basecoat Thinners.
Which Airbrush Cleaner should I use?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirit or Acrylic Thinners, they are not suitable.
Health and Safety Notes :
Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well-ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here ->